Choose Your Glass

Select the manufacturer of the glass you'll be firing. Schedules are specific to each manufacturer and must never be mixed.

✓

COE 96

✓

COE 90 · Tested Compatible

⚠️ Important: Never mix Oceanside Compatible (COE 96) and Bullseye (COE 90) glass in the same project. These formulas have different expansion rates — mixing them will cause breakage.

Project Details

Tell us about your piece so we can generate the right schedule.

Manufacturer: Oceanside Compatible™ (System 96)

Project Name (optional)

Temperature Unit

Measurement Unit

Glass Thickness (inches)

Please enter a glass thickness to continue.

Piece Width (inches)

Piece Height / Length (inches)

Number of Glass Layers (affects bubble squeeze hold time)

2 layers

Glass Components Used (select all that apply — affects bubble squeeze timing)

Please select at least one glass component to continue.

Glass Arrangement (how the glass is positioned in the kiln)

▬Flat lay-up
Layers stacked horizontally

▮On-edge
Glass standing vertically

⬓Mixed
On-edge with flat base

Kiln Size (affects cooling time estimates)

🔸Small
Under 12″ × 12″

🔶Medium
12″ – 18″

🟧Large
18″ – 24″

🟥X-Large
Over 24″

Firing Profile

Choose the profile that matches your intended result.

📖 Oceanside Compatible — Forming Stage Reference

Slump

1225–1250°F

Tack Fuse

1350–1370°F

Contour Fuse

1400–1440°F

Full Fuse

1460–1475°F

Kiln Schedule

#	Phase	Rate (°F/hr)	Target Temp (°F)	Hold (min)

Firing Curve

Temperature profile over time

Schedules based on manufacturer published firing guidelines. Use at your own risk. Always adjust schedules to suit your specific kiln and project. Results not guaranteed.